<object id="gx5sy"><dd id="gx5sy"><dl id="gx5sy"></dl></dd></object><li id="gx5sy"></li>
    <form id="gx5sy"></form>
        <form id="gx5sy"><pre id="gx5sy"></pre></form><center id="gx5sy"></center>
        <form id="gx5sy"><legend id="gx5sy"></legend></form>
        <wbr id="gx5sy"></wbr>
      1. <sub id="gx5sy"></sub>

      2. <form id="gx5sy"></form>

        德成鋁業

        您的位置:首頁 > 新聞資訊 >

        鋁板電解槽生產的工作原理

        來源:http://www.kongyh.com

        通常情況下,一個系列內鋁板電解槽都是串聯的,每臺電解槽的電流相等的,控制電解槽熱收入的主要參數就是電壓。
        Usually, a series of aluminum plate electrolysis cells are connected in series, and the current of each cell is equal. The main parameter to control the heat gain of the electrolytic cell is voltage.
        根據公式W=IVT可知,槽電壓越高,熱收入越多;槽電壓偏低,熱收入就偏低。在電流、分子比基本穩定的情況下,要想形成理想的爐幫,必須逐步降低槽電壓,減少電解槽的熱收入,促使鋁板電解質的高分子物質在側部結晶析出。因為電解槽的溫度越高,電解質的過熱度越大,而爐幫的形成是在溫度接近電解質的初晶溫度時,才會在側壁析出形成結晶,逐步形成爐幫。
        According to the formula W=IVT, the higher the voltage of the trough, the more heat income, the low voltage of the trough and the low heat income. If the current and molecular ratio are basically stable, if we want to form the ideal furnace, we must gradually reduce the slot voltage, reduce the heat consumption of the electrolytic cell, and promote the crystallization of the polymer material on the side. Because the higher the temperature of the electrolyzer is, the greater the superheat of the electrolyte is. The formation of the furnace is only at the initial temperature of the electrolyte approaching to the electrolyte, then it will precipitate on the side wall and form crystals, and gradually form the furnace side.

        鋁板生產廠家
        如果爐幫過厚時,容易熔化伸腿,化癱鋁水平,而使電流效率降低,遇到這種情況時,應適當的抬高電壓,增加熱收入,融化過厚的爐幫,增加側部散熱,降低爐底溫度,促使伸發育形成。
        If the furnace is too thick, easy to melt your legs, and the level of paralysis of aluminum, the current efficiency decreased, encounter this kind of situation, raise the appropriate voltage, increasing the heat income, the thickness of the furnace for melting, increase heat dissipation, reduce the bottom temperature, the formation of extension.
        飾面層應選用飾面砂漿、點綴灰漿等輕質功能性涂層或有杰出透氣性的水性外墻涂料,這樣讓硅酸鋁板保持了其輕質的特性,也增加了其美觀度。鋁板配件主要選用各類涂料,一方面增加硅酸鋁板的表面的顏色,讓其可以適用于任何環境還有涂料可以一定程度上其到阻燃以及保溫的作用。
        The decorative layer should be decorated with mortar, decorated with mortar and other lightweight functional coatings or excellent waterborne exterior wall coatings, so that the aluminum silicate board maintains its lightweight characteristics, and also increases its beauty. Aluminum plate accessories mainly use various coatings, on the one hand, increase the surface color of aluminum silicate board, so that it can be applied to any environment, and paint can to a certain extent its role in flame retardant and thermal insulation.
        硅酸鋁板主要用于電力工業、電力鍋爐、汽輪機及核電隔熱、船舶工業的防火隔熱、建筑業、防火門的防火隔熱、化工工業高溫反應設備及加熱設備的壁襯、汽車、火車制造業、防火、隔熱、窯爐砌襯、爐門、頂蓋密。
        Silicate aluminum is mainly used for the electric power industry, electric power boiler, steam turbine and thermal power, shipbuilding, construction, fire insulation fire doors fire insulation, chemical industrial high temperature and heating equipment of the wall lining, car and train manufacturing, fire prevention, heat insulation, furnace lining, door, roof cover.
        本文由鋁板生產廠家http://www.kongyh.com小編編輯,更多相關資訊請登錄網站咨詢。
        This article is compiled by http://www.kongyh.com, an aluminum manufacturer, and more information is requested to consult the website.

        友情链接:  2019在线情侣自拍视频 {关键词}
        http:// qmg 双江| 西城区| 郯城县| 娄烦县| 西林县| 汤阴县| 江陵县| 盐池县| 同江市| 盘锦市| 三穗县| 军事| 海兴县| 平果县| 霞浦县| 临邑县| 绍兴县| 奈曼旗| 象州县| 买车| 高青县| 杂多县| 丹江口市| 英山县| 长治市| 准格尔旗| 奈曼旗| 乌拉特后旗| 淅川县| 云霄县| 来凤县| 宁德市| 吴江市| 土默特左旗| 安龙县| 永寿县| 策勒县| 赫章县| 桑日县| 宁陵县|